-a Chimney Caps & Tops | Fireplace Chimney Caps | American Chimney Supplies


CLASS-A ROUND (ACS5)

Our Class "A" cap is a great alternative for a Class "A" Chimney System with solid pack insulation. Our hoods are oversized and they typically measure 16" across.

 The ACS Class "A" is made of 24 gauge 304 stainless steel. It is designed for LIFETIME use with a removable lid for easier future cleanings.  Stock diameters 5" - 12".

Hood Measures about 15" across

Custom diameters made to order for same day shipping.  

 Also available in air cooled style for double and triple walled Class "A". Please call

Also available in 100% Copper, not Copper-Plated Stainless Steel. Please call

 

Bolt On Black Galvanized 9 (BBO9X9)

Powder Coated Black Chimney Cap with the same process used in the boating industry.

The matte black finish is very attractive and comes with a 5 Year Warranty.

These galvanized caps are your Ace-in-the-Hole if you are cost-conscious.

 

Bolt On Adaptor 8 (BOA8X8)

Our bolt on adapter plates are used for adapting any round cap onto a masonry square or rectangle chimney flue.

Also available with cement down flanges.

These work great with our Turbine caps and Vacu-stack's which both are use for Down- Draft Solutions

Picture shown in 8" x 8" with a 2" collar

 

BOLT ON AG 8 X 8 X 4 (BOAG8X8)

Our Animal guards were built to prevent pestly animals from nesting in your chimney such as squirrels, opossums, racoons, etc.

The ACS Animal Guards are constructed with 20 gauge base and 20 gauge screen type 304 stainless steel for a LIFETIME  of use.

Our standard ACS Animal Guards are 4" high for the bolt on and 4" high for the cement on and are available in either 3/4" mesh or 9/16" square holes. Since we manufacture everything in house, we like to use the term "if you can visualize it, we can materialize it". Simply put, if your job requires any custom size or style, we can accomplish it.  Same day turnaround time.

 

Bolt On Copper Cap 9in.x9in. (BOCC9X9)

Our COPPER CAPS are like no others, they are 100 % COPPER not COPPER plated. They are a great accent if you have copper flashing or gutters.

*Available also in ridge roofs please call for prcing on these *

 

Bolt On S/S Cap 8in.x8in. (BOSSC8X8)

Our Premium Single Raincaps are as attractive as they are durable, and are avaialable in 6 stock sizes.

 

 

Bolt On S/S Dbl Flue Cap 9in.x24in. (BOSSC9X24)

Our Chimney Caps are as attractive as they are durable, and are avaialable in 6 stock sizes.

LIFETIME WARRANTY

Keep those animals out of your chimney !

Also available in 100% Copper, not Copper-Plated Stainless Steel.

 

HY-C S/S COVER 9X9 (HYC9X9SS)

These 24 guage single piece covers are 100% stainless steel hood with roll formed edges. It also has 16 guage stainless steel base for extra strength and 18 guage 3/4" expanded stainless steel mesh. Available in the following sizes:

 

Stock Custom Cement Down (KD/10X10)

Our Premium S/S Cement Downs are as attractive as they are durable,with a removable lid for easier future cleanings and are available in over 1000 stock sizes. Made of 304 Stainless Steel with a standard height of 10".

Custom heights and sizes available.

Also available in 100% Copper or Brass. .

NOTE : ALL  orders are taken screen to screen.

NOTE: When Measuring for our Cement Downs .. please measure brick to brick then subtract 3" from eachside which allows our 1 1/4 tabs to not overhang the brick.

NOTE : If you would like your cement down screen to be flush with the end of your brick please measure brick to brick and request REVERSED FLANGES  

Width Height

 

Stock Custom Cement Down - Copper (KD/10X10C)

              * CUSTOM CAPS ARE OUR SPECIALTY *

 

Our COPPER Cement Downs are as attractive as they are durable. Removable lid for easier future cleanings. NOW Available in over 1000 stock sizes! Standard height of 10".

Custom heights and sizes available.

 

NOTE : ALL  orders are taken screen to screen.

NOTE: When Measuring for our Cement Downs .. please measure brick to brick then subtract 3" from eachside which allows our 1 1/4 tabs to not overhang the brick.

NOTE : If you would like your cement down screen to be flush with the end of your brick please measure brick to brick and request REVERSED FLANGES  

Width Height

 

Premium Masonry Bolt On Cap S/S 5in. (PMBO5)

Our Bolt On Round Chimney Caps are made to slip over your flue and bolt down to your masonry clay ..

Typically if your flue measures 6" ID your 6" will accomadate up to a 8 3/4 OD flue

 

Premium Prefab Cap S/S 14in.x19in. (PPC14X19)

This durable cap is a replacement for the standard caps that are typically found on round metal chimneys with either wood, metal, pre-fab square or rectangle housing.

Unlike the caps that come with these housings, our PREMIUM PRE-FAB CAP

 

Premium round bolt on 5in. (PRBO5)

Designed for masonry Round Flues that extend above the crown.

Made with 24 gauge Type 304 stainless steel for a lifetime of use.

Available in nine stock sizes from 4" to 12".

Also available in any custom size that can shipped same day. Just slide it over the flu until it rests on the inside 'stop' flanges and secure set screws. It's that easy! Also available in 100% Copper, not Copper-Plated Stainless Steel.

 

Premium Round S/I Cap Copper 5in. (PRISC5)

This cap is COPPER and designed to "Slip-in' Round Chimney Cap rigid stove pipe of flexible relining systems

This versatile cap can also be used on round masonry chimneys. Available in 9 stock sizes from 4" to 12".

Also available in any custom size you need !!! !

IT'S THAT EASY ORDERING AT AMERICAN CHIMNEY SUPPLIES

 

Premium Round S/I Cap S/S 4in. (PRSI4)

This round cap is designed to "Slip-in' rigid stove pipe of flexible relining systems and is made with 24 guage type 304 stainelss steel.

4" Solid on the bottom w/ approx screen Hegiht at 7" or 8"

 

This versatile cap can also be used on round masonry chimneys. Available in 9 stock sizes from 4" to 12".

Also available in any custom size you need !!! !

IT'S THAT EASY ORDERING AT AMERICAN CHIMNEY SUPPLIES

 

S/S Vent Cap 3in. (SSVC3)

 

SSVC 4in. (SSVC4)

 

Galvanized Turbine 5in. (TG5)
Used for wind related downdraft problems. Provides positive ventilation with the slightest breeze. This product will not create a draft,  it will only prevent a downdraft.

 

S/S Turbine 5in. (TSS5)
Used for wind related downdraft problems. Provides positive ventilation with the slightest breeze. This product will not create a draft,  it will only prevent a downdraft.

 

Vacu Stack Solid Pack 6in. (VSS6)

This cap is used to cure most wind-related back puffing problems. When wind hits the Vacu-Stack it actually increases draft in proportion to the wind speed. The Vacu-Stack won't cure an otherwise poorly drawing flue. Do not use it to cure anything but wind related back puffing problems. The Vacu Stack is made of 26 gauge 304 stainless steel and comes with a lifetime warranty.

 

Vacu Stack Oval 8in.x12in. Solid Pack (VSSO8X12)

 

Vacu Stack Air Cooled 6in. (VSSTDW6)

The Vacu-Stack Air Cooled Chimney Cap is the best solution for wind induced downdrafts. It is designed to fit double or triple-wall, air-insulated, factory built chimneys to stop wind from blowing into the chimney regardless of the wind direction. By accelerating air flow around the Vacu-Stack, flue gasses are forced to flow up and out of the chimney.

This Vacu-Stack Air Cooled Chimney Cap features a unique design that actually increses the draft when the wind hits it as opposed to deflecting it down the chimney and overpowering the draft. A special large 16" bottom collar rests underneath the cap to keep rain from entering the air-insulated chimney and maintain the proper internal venting that is required.

 

Weather Shield Solid Pack 5in. (WSA5)

A universal replacement for standard spark arrestors and raincaps that come with Class "A" Chimney Systems with solid pack insulation.

The Weathershield is available in 5" - 10" diameters for solid pack insulated chimneys and 3" - 4" diameters for pellet applications.

All styles come with a lifetime warranty.

 

Weather Sheild Air Cooled 6in. (WSATDW6)

This style cap is designed to protect class "A" air insulated, double and triple wall pipe.

Slightly larger diameter upper & lower pass accommodate proper air flow these pipes require.

 

 

Chimney Caps & Tops

Chimney caps are the essential pieces that protect the flue below and form the last barrier between your chimney and the environment. These tops guard against inclement weather, debris, insects and animals as well as reducing errant sparks or embers. Chimney caps also help to streamline the flow of air through your chimney and reduce downdrafts that steal warm air or interfere with your heating system.

Our chimney caps are specially made to address a variety of potential problems and fit any chimney design. Each chimney topper utilizes top-quality alloys including copper and stainless steel that will endure elemental exposure without rusting or compromising your exterior. Our unique designs, fastenings and materials provide extra safety, coverage, durability and secure fitting often overlooked in other products.

We carry dozens of designs to assure every chimney receives a top-quality protective covering. Select a chimney cap or choose from complimentary parts to suit your chimney design and make an attractive crown to your home.


HOME | CONTACT INFO | CAPS | DAMPERS | LINERS | FIREPLACE | TOOLS | CUSTOM METAL | FEATURED PRODUCT

©2009 American Chimney Supplies, Inc. All rights reserved. | Privacy Policy | Design Credit

 

 

 

 

 

 

 

 

 

 

American Chimney Supplies, Inc 1.888.423.2836 | Chimney Caps Liners Damplers Fireplace Products Tools Housing Copper Custom Metal Work Hauppauge Long Island Suffolk County New York NY