Master Flex Smooth Wall 3" (MFSW3)
The only Smoothwall liner listed to UL by UL. A highly flexible .006 2 ply s/s liner with a smooth wall inside
This unique design offers such great benefits as:

  • 316L s/s an industry standard for oil & gas applications
  • Great flexibility = Easier installation
  • Smooth wall = unrestricted flow of gasses/fewer nooks and crannies for soot to collect
  • 2 ply construction = Heaviest lihtweight in its class
  • Limited lifetime warranty

Other benefits realized upon installation (You've got to install it to believe it!)

  • MFSW3 Smooth Wall Flex 3"
  • MFSW10 Smooth Wall Flex 10"
  • MFSW11 Smooth Wall Flex 11"
  • MFSW12 Smooth Wall Flex 12"
  • MFSW4 Smooth Wall Flex 4"
  • MFSW5 Smooth Wall Flex 5"
  • MFSW51/2 Smooth Wall Flex 5 1/2"
  • MFSW6 Smooth Wall Flex 6"
  • MFSW7 Smooth Wall Flex 7"
  • MFSW8 Smooth Wall Flex 8"
  • MFSW9 Smooth Wall Flex 9"

 

Master Heavy Weight Flex 5" (MFHL5)
This unique design offers such great benefits as:

  • .018 thickness s/s
  • Type 304
  • For use in wood, coal and oil applications
  • Interlocked design for maximum strength and flexibility
  • Listed to UL by UL
  • 20', 30' and 40' coils
  • Can be shipped same day
  • 316L Available by request

Other benefits realized upon installation (You've got to install it to believe it!)

  • MFHL5 Heavy Wall Flex 5"
  • MFHL10 Heavy Wall Flex 10"
  • MFHL4 Heavy Wall Flex 4"
  • MFHL6 Heavy Wall Flex 6"
  • MFHL7 Heavy Wall Flex 7"
  • MFHL8 Heavy Wall Flex 8"
  • MFHL9 Heavy Wall Flex 9"
 

Master Flex 316L.006 3" (MFL3)
Our newest addition to our line of flexible liners is made of type 316L .006 with a patented "T" locking system.
This design lends itself to unparalleled flexibility without compromising it's locking strength. This means it won't pull apart at the seam under the most rigorous installations. We also have the convenience of offering this liner in a single ply or double ply construction. Just let us know which you prefer when placing your order. For those easy drop ins you may want to go with single ply in order to be more profitable. Or perhaps you have a tough install ahead, that you may winch up, where 2 ply would be more applicable.

CUSTOM OVALIZATION - Our liners can be ovalized at an additional cost of $2.50/ft  to accomodate your specific job requirements. Please call with dimensions.

  • MFL3 ACS Flex-able S/S Liner 3"
  • MFL10 ACS Flex-able S/S Liner 10"
  • MFL12 ACS Flex-able S/S Liner 12"
  • MFL4 ACS Flex-able S/S Liner 4"
  • MFL5 ACS Flex-able S/S Liner 5"
  • MFL6 ACS Flex-able S/S Liner 6"
  • MFL7 ACS Flex-able S/S Liner 7"
  • MFL8 ACS Flex-able S/S Liner 8"
  • MFL9 ACS Flex-able S/S Liner 9"
 

Thermix Insulation (THERMIX)
This flexible aluminum foil-based ceramic fiber blanket wraps around and insulates the liner. It helps the liner warm up quickly to establish strong draft, reduce the heat transfer to the outside of the chimney and reduce condensation. A double layer of the 1/4" thick 8lb density blankets is required for applications where combustible materials are less than the code specified clearances from the chimney. The ProFoil listing allows combustible materials to be in direct contact with the masonry chimney when installed in this fashion. Tape seams with AluFoil tape, then slide ProMesh wire mesh over insulated liner; stretch mesh and clamp at top and bottom with clamps.

 

 

316 2 Part T 3" (SS2PT3)
Used to connect the liner to the heating appliance with a removable snout. Custom sizes are available upon request. Same day turn-around time.

  • SS2PT3 S/S Part Tee 3"
  • SS2PT10 S/S Part Tee 10"
  • SS2PT12 S/S Part Tee 12"
  • SS2PT3 S/S Part Tee 3"
  • SS2PT4 S/S Part Tee 4"
  • SS2PT5 S/S Part Tee 5"
  • SS2PT51/2 S/S Part Tee 5 1/2"
  • SS2PT6 S/S Part Tee 6"
  • SS2PT7 S/S Part Tee 7"
  • SS2PT8 S/S Part Tee 8"
  • SS2PT9 S/S Part Tee 9"
 

316 2 Part Tee Cap 3" (SSTC3)
Used to seal-off a Tee. Custom sizes are available upon request. Same day turn-around time.

  • SSTC3 S/S Tee Cap 3"
  • SSTC10 S/S Tee Cap 10"
  • SSTC12 S/S Tee Cap 12"
  • SSTC4 S/S Tee Cap 4"
  • SSTC5 S/S Tee Cap 5"
  • SSTC51/2 S/S Tee Cap 5 1/2"
  • SSTC6 S/S Tee Cap 6"
  • SSTC7 S/S Tee Cap 7"
  • SSTC8 S/S Tee Cap 8
  • SSTC9 S/S Tee Cap 9"
 

316L Top Plate 3" (SSTP3)
Used to connect and seal your liner at the top and support a fireplace reliner from the bottom. All our plates have a standard 2" collar. 3"-12" diameters. Our top plates are also available with:

  • SSTP3 S/S Top Plate 3"
  • SSTP10 S/S Top Plate 10"
  • SSTP12 S/S Top Plate 12"
  • SSTP4 S/S Top Plate 4"
  • SSTP5 S/S Top Plate 5"
  • SSTP51/2 S/S Top Plate 5 1/2"
  • SSTP6 S/S Top Plate 6"
  • SSTP7 S/S Top Plate 7"
  • SSTP8 S/S Top Plate 8"
  • SSTP9 S/S Top Plate 9"
 

316L Top Plate With Clamp 8"x8" (SSTPC8X8)
Used to connect and seal your liner at the top and support a fireplace reliner from the bottom. All our plates have a standard 2" collar.

  • SSTPC8X8 316L Top Plate w/Clamp 8" X 8"
  • SSTPC13X13 316L Top Plate w/Clamp 13" X 13"
  • SSTPC13X17 316L Top Plate w/Clamp 13" X 17"
  • SSTPC8X13 316L Top Plate w/Clamp 8" X 13"
 

316L Ovalized Top Plate 6" (SSTPO6)
This plate is availble in the following sizes:

  • SSTPO6 S/S Ovalized Top Plate 6"
  • SSTPO7 S/S Ovalized Top Plate 7"
  • SSTPO8 S/S Ovalized Top Plate 8"
 

90° Adjustable Elbow 24 GA 3"  (SSE3)
Fully adjusts from 0° to 90° for easier installation.

  • SSE3 S/S Elbow 3"
  • SSE10 S/S Elbow 10"
  • SSE 12 S/S Elbow 12"
  • SSE4 S/S Elbow 4"
  • SSE5 S/S Elbow 5"
  • SSE6 S/S Elbow 6"
  • SSE7 S/S Elbow 7"
  • SSE8 S/S Elbow 8"
  • SSE9 S/S Elbow 9"
 

316L Reducer / Increaser 4"x3" (SSR43)
Reducers and increasers allow you to connect pipe of different diameters. Our reducers come stock with no crimp on either end,  but are available with crimp upon request if needed.

  • SSR43 S/S Reducer 5" X 3"
  • SSR43 S/S Reducer 5" X 4"
  • SSR43 S/S Reducer 6" X 3"
  • SSR43 S/S Reducer 6" X 4"
  • SSR43 S/S Reducer 6" X 5"
  • SSR43 S/S Reducer 7" X 5"
  • SSR43 S/S Reducer 7" X 6"
  • SSR43 S/S Reducer 8" X 7"
 

316L Liner Coupling 3" (SSC3)
This male fitting is designed to attach two pieces of flexible liner.

  • SSC3 S/S Connector 3"
  • SSC10 S/S Connector 10"
  • SSC12 S/S Connector 12"
  • SSC4 S/S Connector 4"
  • SSC5 S/S Connector 5"
  • SSC51/2 S/S Connector 5 1/2"
  • SSC6 S/S Connector 6"
  • SSC7 S/S Connector 7"
  • SSC8 S/S Connector 8"
  • SSC9 S/S Connector 9"
 

Nose Cone 3" (NC3)
Nose cones are designed with an inside fit to guide s/s liners through bends and tough installations when you're pulling the liner down or using a winch to pull it up.

  • NC3 S/S Nose Cone 3"
  • NC10 S/S Nose Cone 10"
  • NC12 S/S Nose Cone 12"
  • NC4 S/S Nose Cone 4"
  • NC5 S/S Nose Cone 5"
  • NC51/2 S/S Nose Cone 5 1/2"
  • NC6 S/S Nose Cone 6"
  • NC7 S/S Nose Cone 7"
  • NC8 S/S Nose Cone 8"
  • NC9 S/S Nose Cone 9"
 

Top Support Clamp 5" (TCSS5)
These clamps are used to support a reline system when installed above the Top Plate.  Two halves, bolted closed around the liners.

  • TCCSS5 S/S Top Clamp 5"
  • TCCSS10 S/S Top Clamp 10"
  • TCCSS6 S/S Top Clamp 6"
  • TCCSS7 S/S Top Clamp 7"
  • TCCSS8 S/S Top Clamp 8"
  • TCCSS9 S/S Top Clamp 9"
 

316L Short Body Tee w/Tee Cap 5" (SS2PT5)
These shorty Tees are a great time saver for those installations where there is limited or no space below the entry of the appliance. Tee Caps included with every Tee.

  • SS2PT5 S/S 2 Part Tee 5"
  • SS2PT10 S/S 2 Part Tee 10"
  • SS2PT12 S/S 2 Part Tee 12"
  • SS2PT3 S/S 2 Part Tee 3"
  • SS2PT4 S/S 2 Part Tee 4"
  • SS2PT51/2 S/S 2 Part Tee 5 1/2"
  • SS2PT6 S/S 2 Part Tee 6"
  • SS2PT7 S/S 2 Part Tee 7"
  • SS2PT8 S/S 2 Part Tee 8"
  • SS2PT9 S/S 2 Part Tee 9"
  •  
 

316 Double Base Tee 5" Body 5 + 4 Snout (SSDBT5)
Used to connect your liner to not only one appliance but two separate appliances when the pipes are one above each other. These helpful Tees are also available with snouts in any direction upon request. Tee Caps included with Double Base Tee.

  • SSDBT5 316L Double Base Tee 5" Body 6+4 snout
  • SSDBT5.5 316L Double Base Tee 5.5" Body 6+4 snout
  • SSDBT6 316L Double Base Tee 6" Body 6+4 snout
  • SSDBT7 316L Double Base Tee 7" Body 7+4 snout
  • SSDBT8 316L Double Base Tee 8" Body 8+4 snout
 

316 Ovalized Tee on Wide Side 5" (SSOT5)
These Tees are designed to fit our oval sized liner. Ideal for use whether you're installing our regular single ply or regular double ply or even our heavy wall liner.

  • SSOT5 S/S Oval Tee 5"
  • SSOT10 S/S Oval Tee 10"
  • SSOT12 S/S Oval Tee 12"
  • SSOT14 S/S Oval Tee 14"
  • SSOT6 S/S Oval Tee 6"
  • SSOT7 S/S Oval Tee 7"
  • SSOT8 S/S Oval Tee 8"
  • SSOT9 S/S Oval Tee 9"
 

316L Oval Tee on Narrow Side 5" (SSOTN5)
These Tees are designed to fit our oval sized liner. Ideal for use whether you're installing our regular single ply or regular double ply or even our heavy wall liner.

  • SSSOTN5 316lL Oval Tee On Narrow Side 5"
  • SSSOTN55 316lLOval Tee On Narrow Side 5.5"
  • SSOTN10 316L Oval Tee on Narrow Side 10"
  • SSOTN12 316L Oval Tee on Narrow Side 12"
  • SSOTN14 316L Oval Tee on Narrow Side 14"
  • SSOTN6 316L Oval Tee on Narrow Side 6"
  • SSOTN7 316L Oval Tee on Narrow Side 7"
  • SSOTN8 316L Oval Tee on Narrow Side 8"
  • SSOTN9 316L Oval Tee on Narrow Side 9"
 

Storm Collar 3" (SSSC3)
Storm collars minimize moisture between the liner and the oversized hole in your top plate. Installs above a top clamp.

  • SSSC3 S/S Storm Collar 3"
  • SSSC10 S/S Storm Collar 10"
  • SSSC12 S/S Storm Collar 12"
  • SSSC13 s/s Storm Collar13"
  • SSSC14 S/S Storm Collar14"
  • SSSC4 S/S Storm Collar 4"
  • SSSC5 S/S Storm Collar 5"
  • SSSC51/2 S/S Storm Collar 5 1/2"
  • SSSC6 S/S Storm Collar 6"
  • SSSC7 S/S Storm Collar 7"
  • SSSC8 S/S Storm Collar 8"
  • SSSC9 S/S Storm Collar 9"
 

Butt Seamed Welded Pipe 3" (BSWP3)
This new pipe is offered with laser quality welded seams. This pipe should not be confused with an overlap spot welded seam that could leak, or lock form folded seam both of which show an unattractive longitunal seam. Our new pipe is not only safer and air tight, it also has an unblemished appearance making for one beautiful pipe. We manufacture this pipe in our warehouse, it's all in stock and ships the same day.

Step up to quality without compromising your profit. Offered in 12" - 60" lengths.

  • BSWP10 BUTT SEAMED WELDED PIPE 10"
  • BSWP12 BUTT SEAMED WELDED PIPE 12"
  • BSWP13 BUTT SEAMED WELDED PIPE 13"
  • BSWP14 BUTT SEAMED WELDED PIPE 14"
  • BSWP15 BUTT SEAMED WELDED PIPE 15"
  • BSWP16 BUTT SEAMED WELDED PIPE 16"
  • BSWP4 BUTT SEAMED WELDED PIPE 4"
  • BSWP5 BUTT SEAMED WELDED PIPE 5"
  • BSWP5.5 BUTT SEAMED WELDED PIPE 5.5"
  • BSWP6 BUTT SEAMED WELDED PIPE 6"
  • BSWP7 BUTT SEAMED WELDED PIPE 7"
  • BSWP8 BUTT SEAMED WELDED PIPE 8"
  • BSWP9 BUTT SEAMED WELDED PIPE 9"
 

Wall Vent 4" (WVCSS4)
Wall vents can be used for a variety of applications such as venting kitchen rangehoods, dryer vent, fresh air intakes, etc. These vents can be ordered with animal screens or without. Available in 100% Stainless Steel or 100% Copper Vent with Stainless Slip In. Get the look of copper without the cost.

  • WVCSS10 WV COPPER TOP S/S PIPE FLAP OR SCREEN 10"
  • WVCSS4 WV COPPER TOP S/S PIPE FLAP OR SCREEN 4" WVCSS5 WV COPPER TOP S/S PIPE FLAP OR SCREEN 5"
  • WVCSS6 WV COPPER TOP S/S PIPE FLAP OR SCREEN 6"
  • WVCSS7 WV COPPER TOP S/S PIPE FLAP OR SCREEN 7"
  • WVCSS8 WV COPPER TOP S/S PIPE FLAP OR SCREEN 8"
  • WVCSS9 WV COPPER TOP S/S PIPE FLAP OR SCREEN 9"
  • WVSS10 WALL VENT S/S PIPE FLAP OR SCREEN 10"
  • WVSS4 WALL VENT S/S PIPE FLAP OR SCREEN 4"
  • WVSS5 WALL VENT S/S PIPE FLAP OR SCREEN 5"
  • WVSS6 WALL VENT S/S PIPE FLAP OR SCREEN 6"
  • WVSS7 WALL VENT S/S PIPE FLAP OR SCREEN 7"
  • WVSS8 WALL VENT S/S PIPE FLAP OR SCREEN 8"
  • WVSS9 WALL VENT S/S PIPE FLAP OR SCREEN 9"
 

90° Galvanized Elbow 3" (GE3)
Sturdy 4 piece construction that is adjustable 0° - 90°. Made of 26 guage steel.

  • GE3 Galvanized Elbow 3"
  • GE4 Galvanized Elbow 4"
  • GE5 Galvanized Elbow 5"
  • GE6 Galvanized Elbow 6"
  • GE7 Galvanized Elbow 7"
  • GE8 Galvanized Elbow 8"
  • GE9 Galvanized Elbow 9"
 

45° Galvanized Saddle 3" (GS3)
Used when venting a second appliance from an existing smoke pipe when a "Y" pipe is not available.

  • GS3 45 Degree Galvanized Saddle 3"
  • GS4 45 Degree Galvanized Saddle 4"
  • GS5 45 Degree Galvanized Saddle 5"
  • GS6 45 Degree Galvanized Saddle 6"
  • GS7 45 Degree Galvanized Saddle 7"
  • GS8 45 Degree Galvanized Saddle 8"
 

Galvanized Reducer / Increaser 4" X 3" (GR43)
Used to reduce or increase round pipe from a larger to smaller diameter.

  • GR1012 Galvanized Reducer 4"x3"
  • GR1012 Galvanized Reducer 10"x12"
  • GR54 Galvanized Reducer 5"x4"
  • GR64 Galvanized Reducer 6"x4"
  • GR65 Galvanized Reducer 6"x5"
  • GR76 Galvanized Reducer 7"x6"
  • GR810 Galvanized Reducer 8"x10"
  • GR86 Galvanized reducer 8"x6"
  • GR87 Galvanized reducer 8"x7"
  • GR98 Galvanized Reducer 9"x8"
 

Galvanized Vent Cap 3" (GVC3)
Used to protect bathroom and kitchen vent pipes from snow, rain and other debris. Also available in stainless steel upon request.

  • GVC3 Galvanized Vent Cap 3"
  • GVC4 Galvanized Vent Cap 4"
 


HOME | CONTACT INFO | CAPS | DAMPERS | LINERS | FIREPLACE | TOOLS | CUSTOM METAL | FEATURED PRODUCT

©2009 American Chimney Supplies, Inc. All rights reserved. | Privacy Policy | Design Credit

 

 

 

 

 

 

 

 

 

 

American Chimney Supplies, Inc 1.888.423.2836 | Chimney Caps Liners Damplers Fireplace Products Tools Housing Copper Custom Metal Work Hauppauge Long Island Suffolk County New York NY